Creep damage assessment of ex-service 12% Cr power plant steel using digital image correlation and quantitative microstructural evaluation
Date
2019
Journal Title
Journal ISSN
Volume Title
Publisher
MDPI
Abstract
ENGLISH ABSTRACT: The lifetime of steam pipelines in long-term operation in coal-fired power plants are limited due to material damage that resulted from creep exposure. In the present study, the authors comparatively assess the damage of ex-service 12% Cr piping steel with varying degrees of exposure while using accelerated creep tests that employ digital image correlation (DIC) as well as microstructural investigation that is based on electron microscopy. The DIC technique, which allows multiple creep curves to be measured at temperatures ranging from 550–600 °C from a single specimen, revealed higher Zener–Hollomon parameters for a high damage material with a high void density when compared to a material with lower damage and lower void density. Both of the material states showed similar hardness values, subgrain sizes, and boundary character, despite the difference in void densities. Slightly higher inter-particle spacing of MX precipitates results in a lower threshold stress of 79 MPa for the high damage steel when compared to 97 MPa for the low damage material. Besides large Laves phase particles (>0.2 µm) that are found in the higher damaged materials that result in solid solution depletion, the most prominent microstructural damage indicator was a lower density of M₂₃C₆ precipitates. Therefore, the observations indicate that the Zener–Hollomon parameter and
M₂₃C₆ particles are good damage assessment indicators between the most extreme damage states
and they predict a lower damage level for a medium void density material.
Description
CITATION: Van Rooyen, M., et al. 2019. Creep damage assessment of ex-service 12% Cr power plant steel using digital image correlation and quantitative microstructural evaluation. Materials, 12(19):3106, doi:10.3390/ma12193106.
The original publication is available at https://www.mdpi.com
Publication of this article was funded by the Stellenbosch University Open Access Fund
The original publication is available at https://www.mdpi.com
Publication of this article was funded by the Stellenbosch University Open Access Fund
Keywords
Creep damage, Creep testing machines, Plants, Power, Microstructure -- Evaluation, Steel, Digital image correlation
Citation
Van Rooyen, M., et al. 2019. Creep damage assessment of ex-service 12% Cr power plant steel using digital image correlation and quantitative microstructural evaluation. Materials, 12(19):3106, doi:10.3390/ma12193106