Evaluation of work piece temperature measurement techniques for milling of Ti6Al4V

Simple item page
dc.contributor.authorConradie, P. J. T.en_ZA
dc.contributor.authorOosthuizen, G. A.en_ZA
dc.contributor.authorTreurnicht, N. F.en_ZA
dc.contributor.authorAl Shaalane, A.en_ZA
dc.date.accessioned2012-08-10T15:43:52Z
dc.date.available2012-08-10T15:43:52Z
dc.date.issued2011-09
dc.descriptionThe original publication is available at http://www.isem.org.za/index.php/isem/isem2011.en_ZA
dc.descriptionConference of the ISEM 2011 Proceedings, Stellenbosch, South Africa, 21 - 23 September 2011.en_ZA
dc.descriptionConference theme - Innovative Systems Thinking: Unravelling Complexity for Successful Solutions.en_ZA
dc.description.abstractTi6Al4V is one of the most widely used titanium alloys in aerospace applications, but its machining remains a challenge. This is partly due to the lack of understanding of the thermal- and mechanical constraints during milling. Extensive research has been done in the past investigating catastrophic tool failure of various tool materials. However, not much research has been done to investigate the cause of work piece failure. The catastrophic effect of overheating the work piece and the resulting alpha case formation in titanium is well known. Current techniques of temperature measurement of the machined surface can be divided into two categories: contact- and optical methods. In this study these temperature measurement techniques were studied and evaluated. The response time of contact methods are found to be to relatively slow. The optical methods have the advantage of immediate response, allowing capture of intermittent heat generation as required in milling. The infrared camera temperature measurement experiments were conducted with a special setup in order to have a good visual of the temperature flow. The results of these experiments were found to correspond with literature.en_ZA
dc.description.sponsorshipThe Industrial, Systems and Engineering Management (ISEM) conference is a joint initiative between the Southern African Institute for Industrial Engineering (SAIIE), INCOSE (South Africa) and the Graduate School for Technology Management at the University of Pretoriaen_ZA
dc.description.versionPublishers' Versionen_ZA
dc.identifier.citationConradie, P. J. T., Oosthuizen, G. A., Treurnicht, N. F. & Al Shaalane, A. 2011. Evaluation of work piece temperature measurement techniques for milling of Ti6Al4V. Presented at the ISEM 2011 Proceedings, September 21-23, Stellenbosch University, Stellenbosch, South Africa.en_ZA
dc.identifier.urihttp://hdl.handle.net/10019.1/39383
dc.language.isoen_ZAen_ZA
dc.publisherStellenbosch : Stellenbosch University, Department of Industrial Engineeringen_ZA
dc.rights.holderAuthors retain copyrighten_ZA
dc.subjectTitanium alloysen_ZA
dc.subjectAerospace sectorsen_ZA
dc.subjectBio-medical sectorsen_ZA
dc.subjectCorrosion resistance alloysen_ZA
dc.subjectMillingen_ZA
dc.subjectManufacturing techniquesen_ZA
dc.titleEvaluation of work piece temperature measurement techniques for milling of Ti6Al4Ven_ZA
dc.typeConference Paperen_ZA
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
conradie_evaluation_2011.pdf
Size:
1.24 MB
Format:
Adobe Portable Document Format
Description:
Post-print
Download
Collections
Conference Proceedings (Industrial Engineering)