Masters Degrees (Electrical and Electronic Engineering)

Permanent URI for this collection

https://scholar.sun.ac.za/handle/10019.1/766

Browse

Browsing Masters Degrees (Electrical and Electronic Engineering) by Subject "3D Finite Element Analysis"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Optimisation of a transverse flux linear PM generator using 3D Finite Element Analysis
    (Stellenbosch : Stellenbosch University, 2011-12) Schutte, Jacques; Strauss, J. M.; Stellenbosch University. Faculty of Engineering. Dept. of Electrical and Electronic Engineering.
    ENGLISH ABSTRACT: Several transverse flux and longitudinal flux linear generator topologies exist for freepiston Stirling engine applications. In this thesis the transverse flux permanent magnet linear generators are investigated together with a back-to-back converter which can deliver the electrical energy from the linear generator to the electrical network. The transverse flux permanent magnet linear generator is geometrically optimised with the aim to maximise the power-to-weight ratio while maintaining preset power and efficiency levels. An optimised 3 kW linear generator is built and the measured results correlate to the simulation results. A close-loop current control scheme is introduced to control the current of the rectifier, which is part of the back to back converter. The transverse flux permanent magnet linear generator is connected to the input of the rectifier which has the ability to force a specific current from the generator. The measured results of the rectifier correlate to the results of the simulations that were done. The current control present some complications and it is suggested that another control scheme is used. A close-loop voltage control scheme is introduced for the control of the DC bus voltage. The DC bus is connected between the rectifier and the inverter, which is the other part of the back-to-back converter. A close-loop current control scheme is introduced to control the inverter current that flows from the inverter to the electrical network. The measured results of the inverter and the DC bus correlate to the results of the simulations that were done. The results of the system, including the generator, rectifier and inverter, tested as a unit is presented and discussed.