SUNScholar - Browsing by Author "Wolfaardt, Gideon M."

Browsing by Author "Wolfaardt, Gideon M."

Now showing 1 - 11 of 11

Bacterial diversity and production of sulfide in microcosms containing uncompacted bentonites
(2018) Grigoryan, Alexander A.; Jalique, Daphne R.; Medihala, Prabhakara; Stroes-Gascoyne, Simcha; Wolfaardt, Gideon M.; McKelvie, Jennifer; Korber, Darren R.
Aims: This study examined the diversity and sulfide-producing activity of microorganisms in microcosms containing commercial clay products (e.g., MX-80, Canaprill and National Standard) similar to materials which are currently considered for use in the design specifications for deep geologic repositories (DGR) for spent nuclear fuel. Methods and results: In anoxic microcosms incubated for minimum of 60 days with 10 g l-¹ NaCl, sulfide production varied with temperature, electron donor and bentonite type. Maximum specific sulfide production rates of 0.189 d-¹, 0.549 d-¹ and 0.157 d-¹ occurred in lactate-fed MX-80, Canaprill and National Standard microcosms, respectively. In microcosms with 50 g l-¹ NaCl, sulfide production was inhibited. Denaturing gradient gel electrophoresis (DGGE) profiling of microcosms revealed the presence of bacterial classes Clostridia, Bacilli, Gammaproteobacteria, Deltaproteobacteria, Actinobacteria, Sphingobacteriia and Erysipelotrichia. Spore-forming and non-spore-forming bacteria were confirmed in microcosms using high-throughput 16S rRNA gene sequencing. Sulfate-reducing bacteria of the genus Desulfosporosinus predominated in MX-80 microcosms; whereas, Desulfotomaculum and Desulfovibrio genera contributed to sulfate-reduction in National Standard and Canaprill microcosms. Conclusions: Commercial clays microcosms harbour a sparse bacterial population dominated by spore-forming microorganisms. Detected sulfate- and sulfur-reducing bacteria presumably contributed to sulfide accumulation in the different microcosm systems. Significance and impact of study The use of carbon-supplemented, clay-in-water microcosms offered insights into the bacterial diversity present in as-received clays, along with the types of metabolic and sulfidogenic reactions that might occur in regions of a DGR (e.g., interfaces between the bulk clay and host rock, cracks, fissures, etc.) that fail to attain target parameters necessary to inhibit microbial growth and activity.
Bioenergy and African transformation
(BioMed Central, 2015-02) Lynd, Lee R.; Sow, Mariam; Chimphango, Annie F. A.; Cortez, Luis A. B.; Brito Cruz, Carlos H.; Elmissiry, Mosad; Laser, Mark; Mayaki, Ibrahim A.; Moraes, Marcia A. F. D.; Nogueira, Luiz A. H.; Wolfaardt, Gideon M.; Woods, Jeremy; Van Zyl, Willem H.
Among the world’s continents, Africa has the highest incidence of food insecurity and poverty and the highest rates of population growth. Yet Africa also has the most arable land, the lowest crop yields, and by far the most plentiful land resources relative to energy demand. It is thus of interest to examine the potential of expanded modern bioenergy production in Africa. Here we consider bioenergy as an enabler for development, and provide an overview of modern bioenergy technologies with a comment on application in an Africa context. Experience with bioenergy in Africa offers evidence of social benefits and also some important lessons. In Brazil, social development, agricultural development and food security, and bioenergy development have been synergistic rather than antagonistic. Realizing similar success in African countries will require clear vision, good governance, and adaptation of technologies, knowledge, and business models to myriad local circumstances. Strategies for integrated production of food crops, livestock, and bioenergy are potentially attractive and offer an alternative to an agricultural model featuring specialized land use. If done thoughtfully, there is considerable evidence that food security and economic development in Africa can be addressed more effectively with modern bioenergy than without it. Modern bioenergy can be an agent of African transformation, with potential social benefits accruing to multiple sectors and extending well beyond energy supply per se. Potential negative impacts also cut across sectors. Thus, institutionally inclusive multi-sector legislative structures will be more effective at maximizing the social benefits of bioenergy compared to institutionally exclusive, single-sector structures.
Biofilm dynamics : linking in situ biofilm biomass and metabolic activity measurements in real-time under continuous flow conditions
(Nature Research, 2020) Klopper, Kyle Brent; De Witt, Riaan N.; Bester, Elanna; Dicks, Leon Milner Theodore, 1961-; Wolfaardt, Gideon M.
The tools used to study biofilms generally involve either destructive, end-point analyses or periodic measurements. The advent of the internet of things (IoT) era allows circumvention of these limitations. Here we introduce and detail the development of the BioSpec; a modular, nondestructive, real-time monitoring system, which accurately and reliably track changes in biofilm biomass over time. The performance of the system was validated using a commercial spectrophotometer and produced comparable results for variations in planktonic and sessile biomass. BioSpec was combined with the previously developed carbon dioxide evolution measurement system (CEMS) to allow simultaneous measurement of biofilm biomass and metabolic activity and revealed a differential response of these interrelated parameters to changing environmental conditions. The application of this system can facilitate a greater understanding of biofilm mass–function relationships and aid in the development of biofilm control strategies.
Canary in the coliform mine : exploring the industrial application limits of a microbial respiration alarm system
(Public Library of Science, 2021-03-04) Stone, Wendy; Louw, Tobi M.; Booysen, Marthinus J.; Wolfaardt, Gideon M.; Zhang, Dawei
Fundamental ecological principles of ecosystem-level respiration are extensively applied in greenhouse gas and elemental cycle studies. A laboratory system termed CEMS (Carbon Dioxide Evolution Measurement System), developed to explore microbial biofilm growth and metabolic responses, was evaluated as an early-warning system for microbial disturbances in industrial settings: in (a) potable water system contamination, and (b) bioreactor inhibition. Respiration was detected as CO₂ production, rather than O₂ consumption, including aerobic and anaerobic metabolism. Design, thresholds, and benefits of the remote CO₂ monitoring technology were described. Headspace CO₂ correlated with contamination levels, as well as chemical (R² > 0.83–0.96) and microbiological water quality indicators (R² > 0.78–0.88). Detection thresholds were limiting factors in monitoring drinking water to national and inter- national standards (0 CFU/100 mL fecal coliforms) in both open- (>1500 CFU/mL) and closed-loop CO₂ measuring regimes (>100 CFU/100 mL). However, closed-loop detection thresholds allow for the detection of significant contamination events, and monitoring less stringent systems such as irrigation water (<100 CFU/mL). Whole-system respiration was effectively harnessed as an early-warning system in bioreactor performance monitoring. Models were used to deconvolute biological CO₂ fluctuations from chemical CO₂ dynamics, to optimize this real-time, sustainable, low-waste technology, facilitating timeous responses to biological disturbances in bioreactors.
Disinfectant, Soap or Probiotic Cleaning? Surface Microbiome Diversity and Biofilm Competitive Exclusion
(MDPI [Commercial Publisher], 2020-11-04) Stone, Wendy; Tolmay, Janke; Tucker, Keira; Wolfaardt, Gideon M.
This study extends probiotic cleaning research to a built environment. Through an eight-month cleaning trial, we compared the e ect of three cleaning products (disinfectant, plain soap, and a probiotic cleaner containing a patented Bacillus spore consortium), and tap water as the control, on the resident microbiome of three common hospital surfaces (linoleum, ceramic, and stainless steel). Pathogens, Escherichia coli and Staphylococcus aureus, were deposited and desiccated, and competitive exclusion was assessed for each microbiome. Cell survival was shown to be an incomplete tool for measuring microbial competitive exclusion. Biofilm competition offered a fuller understanding of competitive dynamics. A test for culturable cell survival showed that both plain soap and probiotic cleaner regimes established a surface microbiome that outcompeted the two pathogens. A different picture emerged when observing biofilms with a deposited and desiccated GFP-labeled pathogen, Pseudomonas aeruginosa. Competitive exclusion was again demonstrated. On surfaces cleaned with disinfectant the pathogen outcompeted the microbiomes. On surfaces cleaned with plain soap, the microbiomes outcompeted the pathogen. However, on surfaces cleaned with probiotic cleaner, despite the exponentially higher surface microbial loads, the microbiome did not completely outcompete the pathogen. Thus, the standard culturable cell test for survival on a surface confirmed the competitive advantage that is typically reported for probiotic cleaners. However, observation of competition in biofilms showed that the more diverse microbiome (according to alpha and beta indices) established on a surface cleaned with plain soap had a better competitive advantage than the monoculture established by the probiotic cleaner. Therefore, microbial diversity appears to be as critical to the competitive exclusion principle as cell numbers. The study showed that both plain soap and probiotic cleaner fostered competitive exclusion far more effectively than disinfectant. Probiotic cleaners with microbial diversity could be worth considering for hospital cleaning.
Effect of carbon on whole-biofilm metabolic response to high doses of streptomycin
(Frontiers Media, 2015) Jackson, Lindsay M. D.; Kroukamp, Otini; Wolfaardt, Gideon M.
Biofilms typically exist as complex communities comprising multiple species with the ability to adapt to a variety of harsh conditions. In clinical settings, antibiotic treatments based on planktonic susceptibility tests are often ineffective against biofilm infections. Using a CO2 evolution measurement system we delineated the real-time metabolic response in continuous flow biofilms to streptomycin doses much greater than their planktonic susceptibilities. Stable biofilms from a multispecies culture (containing mainly Pseudomonas aeruginosa and Stenotrophomonas maltophilia), Gram-negative environmental isolates, and biofilms formed by pure culture P. aeruginosa strains PAO1 and PAO1 ΔMexXY (minimum planktonic inhibitory concentrations between 1.5 and 3.5 mg/l), were exposed in separate experiments to 4000 mg/l streptomycin for 4 h after which growth medium resumed. In complex medium, early steady state multispecies biofilms were susceptible to streptomycin exposure, inferred by a cessation of CO2 production. However, multispecies biofilms survived high dose exposures when there was extra carbon in the antibiotic medium, or when they were grown in defined citrate medium. The environmental isolates and PAO1 biofilms showed similar metabolic profiles in response to streptomycin; ceasing CO2 production after initial exposure, with CO2 levels dropping toward baseline levels prior to recovery back to steady state levels, while subsequent antibiotic exposure elicited increased CO2 output. Monitoring biofilm metabolic response in real-time allowed exploration of conditions resulting in vulnerability after antibiotic exposure compared to the resistance displayed following subsequent exposures.
Microbes at surface-air interfaces : the metabolic harnessing of relative humidity, surface hygroscopicity, and oligotrophy for resilience
(Frontiers, 2016) Stone, Wendy; Kroukamp, Otini; Korber, Darren R.; McKelvie, Jennifer; Wolfaardt, Gideon M.
The human environment is predominantly not aqueous, and microbes are ubiquitous at the surface-air interfaces with which we interact. Yet microbial studies at surface-air interfaces are largely survival-oriented, whilst microbial metabolism has overwhelmingly been investigated from the perspective of liquid saturation. This study explored microbial survival and metabolism under desiccation, particularly the influence of relative humidity (RH), surface hygroscopicity, and nutrient availability on the interchange between these two phenomena. The combination of a hygroscopic matrix (i.e., clay or 4,000 MW polyethylene glycol) and high RH resulted in persistent measurable microbial metabolism during desiccation. In contrast, no microbial metabolism was detected at (a) hygroscopic interfaces at low RH, and (b) less hygroscopic interfaces (i.e., sand and plastic/glass) at high or low RH. Cell survival was conversely inhibited at high RH and promoted at low RH, irrespective of surface hygroscopicity. Based on this demonstration of metabolic persistence and survival inhibition at high RH, it was proposed that biofilm metabolic rates might inversely influence whole-biofilm resilience, with ‘resilience’ defined in this study as a biofilm’s capacity to recover from desiccation. The concept of whole-biofilm resilience being promoted by oligotrophy was supported in desiccation-tolerant Arthrobacter spp. biofilms, but not in desiccation-sensitive Pseudomonas aeruginosa biofilms. The ability of microbes to interact with surfaces to harness water vapor during desiccation was demonstrated, and potentially to harness oligotrophy (the most ubiquitous natural condition facing microbes) for adaptation to desiccation.
Pharmaceutical and personal care products (PPCPs) as endocrine disrupting contaminants (EDCs) in South African surface waters
(South African Water Research Commission, 2017-10) Archer, Edward; Wolfaardt, Gideon M.; Van Wyk, Johannes H.
Globally, water resources are under constant threat of being polluted by a diverse range of man-made chemicals, and South Africa is no exception. These contaminants can have detrimental effects on both human and wildlife health. It is increasingly evident that several chemicals may modulate endocrine system pathways in vertebrate species, and these are collectively referred to as endocrine disrupting contaminants (EDCs). Although the endocrine-disrupting effect of water pollutants has been mainly linked to agricultural pesticides and industrial effluents, other pollutants such as pharmaceuticals and personal care products (PPCPs) are largely unnoticed, but also pose a potentially significant threat. Here we present for the first time in a South African context, a summarised list of PPCPs and other EDCs detected to date within South African water systems, as well as their possible endocrine-disrupting effect in-vitro and in-vivo. This review addresses other factors which should be investigated in future studies, including endocrine disruption, PPCP metabolites, environmental toxicology, and antibiotic resistance. The challenges of removing EDCs and other pollutants at South African wastewater treatment works (WWTWs) are also highlighted. The need for focused research involving both in-vitro and in-vivo studies to detect PPCPs in water systems, and to delineate adverse outcome pathways (AOPs) of priority PPCPs to aid in environmental impact assessment (EIA), are discussed.
Species interaction and selective carbon addition during antibiotic exposure enhances bacterial survival
(Frontiers Media, 2019-11-29) Jackson, Lindsay M. D.; Kroukamp, Otini; Yeung, William C.; Ronan, Evan; Liss, Steven N.; Wolfaardt, Gideon M.
Biofilms are multifaceted and robust microbiological systems that enable microorganisms to withstand a multitude of environmental stresses and expand their habitat range. We have shown previously that nutritional status alters antibiotic susceptibility in a mixed-species biofilm. To further elucidate the effects of nutrient addition on inter-species dynamics and whole-biofilm susceptibility to high-dose streptomycin exposures, a CO2 Evolution Measurement System was used to monitor the metabolic activity of early steady state pure-culture and mixed-species biofilms containing Pseudomonas aeruginosa and Stenotrophomonas maltophilia, with and without added carbon. Carbon supplementation was needed for biofilm recovery from high-dose streptomycin exposures when P. aeruginosa was either the dominant community member in a mixed-species biofilm (containing predominantly P. aeruginosa and S. maltophilia) or as a pure culture. By contrast, S. maltophilia biofilms could recover from high-dose streptomycin exposures without the need for carbon addition during antibiotic exposure. Metagenomic analysis revealed that even when inocula were dominated by Pseudomonas, the relative abundance of Stenotrophomonas increased upon biofilm development to ultimately become the dominant species post-streptomycin exposure. The combined metabolic and metagenomic results demonstrated the relevance of inter-species influence on survival and that nutritional status has a strong influence on the survival of P. aeruginosa dominated biofilms.
Tracking the cellulolytic activity of Clostridium thermocellum biofilms
(BioMed Central, 2013-11-29) Dumitrache, Alexandru; Wolfaardt, Gideon M.; Allen, David Grand; Liss, Steven N.; Lynd, Lee R.
Background Microbial cellulose conversion by Clostridium thermocellum 27405 occurs predominantly through the activity of substrate-adherent bacteria organized in thin, primarily single cell-layered biofilms. The importance of cellulosic surface exposure to microbial hydrolysis has received little attention despite its implied impact on conversion kinetics. Results We showed the spatial heterogeneity of fiber distribution in pure cellulosic sheets, which made direct measurements of biofilm colonization and surface penetration impossible. Therefore, we utilized on-line measurements of carbon dioxide (CO2) production in continuous-flow reactors, in conjunction with confocal imaging, to observe patterns of biofilm invasion and to indirectly estimate microbial accessibility to the substrate’s surface and the resulting limitations on conversion kinetics. A strong positive correlation was found between cellulose consumption and CO2 production (R2 = 0.996) and between surface area and maximum biofilm activity (R2 = 0.981). We observed an initial biofilm development rate (0.46 h-1, 0.34 h-1 and 0.33 h-1) on Whatman sheets (#1, #598 and #3, respectively) that stabilized when the accessible surface was maximally colonized. The results suggest that cellulose conversion kinetics is initially subject to a microbial limitation period where the substrate is in excess, followed by a substrate limitation period where cellular mass, in the form of biofilms, is not limiting. Accessible surface area acts as an important determinant of the respective lengths of these two distinct periods. At end-point fermentation, all sheets were digested predominantly under substrate accessibility limitations (e.g., up to 81% of total CO2 production for Whatman #1). Integration of CO2 production rates over time showed Whatman #3 underwent the fastest conversion efficiency under microbial limitation, suggestive of best biofilm penetration, while Whatman #1 exhibited the least recalcitrance and the faster degradation during the substrate limitation period. Conclusion The results showed that the specific biofilm development rate of cellulolytic bacteria such as C. thermocellum has a notable effect on overall reactor kinetics during the period of microbial limitation, when ca. 20% of cellulose conversion occurs. The study further demonstrated the utility of on-line CO2 measurements as a method to assess biofilm development and substrate digestibility pertaining to microbial solubilization of cellulose, which is relevant when considering feedstock pre-treatment options.
Tracking the cellulolytic activity of Clostridium thermocellum biofilms
(BioMed Central, 2013-11-29) Dumitrache, Alexandru; Wolfaardt, Gideon M.; Allen, David Grant; Liss, Steven N.; Lynd, Lee R.
Background: Microbial cellulose conversion by Clostridium thermocellum 27405 occurs predominantly through the activity of substrate-adherent bacteria organized in thin, primarily single cell-layered biofilms. The importance of cellulosic surface exposure to microbial hydrolysis has received little attention despite its implied impact on conversion kinetics. Results: We showed the spatial heterogeneity of fiber distribution in pure cellulosic sheets, which made direct measurements of biofilm colonization and surface penetration impossible. Therefore, we utilized on-line measurements of carbon dioxide (CO2) production in continuous-flow reactors, in conjunction with confocal imaging, to observe patterns of biofilm invasion and to indirectly estimate microbial accessibility to the substrate’s surface and the resulting limitations on conversion kinetics. A strong positive correlation was found between cellulose consumption and CO2 production (R2 = 0.996) and between surface area and maximum biofilm activity (R2 = 0.981). We observed an initial biofilm development rate (0.46 h-1, 0.34 h-1 and 0.33 h-1) on Whatman sheets (#1, #598 and #3, respectively) that stabilized when the accessible surface was maximally colonized. The results suggest that cellulose conversion kinetics is initially subject to a microbial limitation period where the substrate is in excess, followed by a substrate limitation period where cellular mass, in the form of biofilms, is not limiting. Accessible surface area acts as an important determinant of the respective lengths of these two distinct periods. At end-point fermentation, all sheets were digested predominantly under substrate accessibility limitations (e.g., up to 81% of total CO2 production for Whatman #1). Integration of CO2 production rates over time showed Whatman #3 underwent the fastest conversion efficiency under microbial limitation, suggestive of best biofilm penetration, while Whatman #1 exhibited the least recalcitrance and the faster degradation during the substrate limitation period. Conclusion: The results showed that the specific biofilm development rate of cellulolytic bacteria such as C. thermocellum has a notable effect on overall reactor kinetics during the period of microbial limitation, when ca. 20% of cellulose conversion occurs. The study further demonstrated the utility of on-line CO2 measurements as a method to assess biofilm development and substrate digestibility pertaining to microbial solubilization of cellulose, which is relevant when considering feedstock pre-treatment options.

Browsing by Author "Wolfaardt, Gideon M."

Results Per Page

Sort Options