Browsing by Author "Ceaser, Regan"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Comparative analysis of methods for producing nanocellulose from wheat straw and bran, with co-extraction of valuable products
    (Stellenbosch : Stellenbosch University, 2019-12) Ceaser, Regan; Chimphango, Annie F. A.; Gorgens, Johann F.; Stellenbosch University. Faculty of Engineering. Dept. of Process Engineering.
    ENGLISH ABSTRACT: Nanocellulose production has recently attracted much attention from most researchers due to its variable applications in fields such as food, packaging, and medicine. Nanocellulose production from agricultural resides requires cellulose-rich pulp as the precursor which is mainly obtained by bleaching the biomass after pretreatment. Bleaching of the agricultural residues results in the loss and disruption of other cell wall components such as hemicellulose, hydroxycinnamic acid and lignin. However, these cell wall components are valuable products that when extracted can improve the treatment process. It is therefore necessary to develop a method to obtain a cellulose-rich for nanocellulose production while co-extracting these other cell wall components as value-added products. This study focused on developing and optimising a method to produce cellulose-rich pulp to further produce nanocellulose while co-extracting hemicellulose, lignin, ferulic and p-coumaric acid from wheat bran and wheat straw, which are agricultural residues from the wheat production industry. A two-stage alkaline treatment was the selected method for the extraction of hemicellulose, lignin, ferulic and p-coumaric acid while producing a cellulose-rich pulp. The first alkaline treatment stage was termed asa mild alkaline treatment stage due to the mild process conditions (1.5-2.5 wt. % NaOH conc., 20-40°C at 16 hours) used. The mild alkaline treatment was optimised by a central composite design with a response surface methodology targeted at extracting high yields of hemicelluloses and ferulic acid (for wheat bran) or p-coumaric acid (for wheat straw) with the extraction of lignin as a by-product of the treatment. The second stage alkaline treatment termed as the alkaline delignification step was conducted and optimised at treatment conditions of 6-10 wt. % NaOH for wheat bran and 8-12 wt. % NaOH for wheat straw for 30-90 min at 121⁰C. The alkaline delignification optimisation was focused on obtaining a cellulose-rich pulp with minimal lignin content for nanocellulose production whereas extracting as much lignin as possible with hemicelluloses as by-product. The hemicelluloses, lignin and cellulose-rich pulp obtained were analysed by compositional analysis, Fourier Transform Infrared Spectroscopy (FTIR) and a thermogravimetric analysis (TGA) whereas the extracted hydroxycinnamic acids (ferulic and p-coumaric acid) were analysed by compositional analysis and their antioxidant activity determined. The total yield of hemicelluloses and lignin obtained after the two-stage alkaline treatment from wheat straw was 77% and 68%, respectively whereas the p-coumaric yield was 85% with an antioxidant activity of 45%. In addition, the wheat straw cellulose-rich pulp obtained after the two-stage alkaline treatment had a cellulose recovery, cellulose content, hemicelluloses content, lignin content and crystallinity of 97%, 76%, 3%, 5% and 55%, respectively which were within the range for application in nanocellulose production. The results indicated that two-stage alkaline treatment was beneficial for producing cellulose-rich wheat straw with a high crystallinity for nanocellulose production. Yields of 52% and 94% were obtained for the two-stage alkaline treatment of hemicelluloses and lignin, respectively for wheat bran whereas a ferulic acid yield of 65% with a 15% antioxidant activity was obtained. Furthermore, the wheat bran cellulose-pulp obtained had cellulose recovery, cellulose content, hemicellulose content, lignin content and crystallinity of 83%, 48%, 31%, 6% and 41%, respectively. The cellulose recovery indicated cellulose loss during the delignification step whereas the hemicellulose content was high enough to inhibit enzymatic hydrolysis to produce nanocellulose. The alkaline delignified wheat bran cellulose produced required further treatment to be applied in nanocellulose production and was therefore not used in the nanocellulose production stage of this study. Results from nanocellulose production from delignified wheat straw using sulfuric acid, hydrochloric acid and enzymatic treatment indicated that although sulfuric acid produced cellulose nanoparticles presented the highest yield (34%) and crystallinity (75%), it resulted in the lowest maximum thermal decomposition temperature (309⁰C) as compared to both hydrochloric acid and enzymatic treatment. In addition, the yield, zeta potential and maximum thermal decomposition temperature for nanoparticles produced by enzymatic treatment (17.16 ± 2.30%, -15.2 ± 0.6 mV and 378°C, respectively) were similar to that of hydrochloric acid treatment (20.31 ± 1.24%, -16.3 ± 1.50 mV and 380°C, respectively). It was interesting to note that, the yield, zeta potential and maximum thermal degradation temperature were obtained at a shorter time (4.64 h) for enzymatic treatment than the hydrochloric acid treatment (7.41 h), resolving the issue of extended enzymatic treatment times for nanocellulose production. Furthermore, the crystallinity obtained for hydrochloric acid produced nanoparticles (70%) was closer to that of sulfuric acid (75%) produced nanoparticles and higher than enzymatic hydrolysis produced nanoparticles (48%). Hydrochloric acid produced cellulose nanoparticles resulted in improved polydispersity index (0.53 ± 0.20) and fiber morphology (514 ± 50 length) as compared to enzymatic produce nanoparticles (0.92 ± 0.13 PdI and >1 μm length). It can be concluded that between enzymatic and hydrochloric acid treatments, the latter resulted in nanoparticles with improved properties than the former. KEYWORDS Wheat straw; Wheat bran; Alkaline treatment; Hemicellulose; Lignin; p-Coumaric acid; Ferulic acid; Nanocellulose