Masters Degrees (Centre for Renewable and Sustainable Energy Studies)

Permanent URI for this collection

https://scholar.sun.ac.za/handle/10019.1/314

This collection contains dissertations sponsored by the Centre for Renewable and Sustainable Energy Studies.

Browse

Browsing Masters Degrees (Centre for Renewable and Sustainable Energy Studies) by Author "Donkin, Richard Philip"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Plastic photovoltaic roof tiles
    (Stellenbosch : University of Stellenbosch, 2009-12) Donkin, Richard Philip; Van Niekerk, W.; Sebitosi, A. B.; University of Stellenbosch. Faculty of Engineering. Dept. of Mechanical and Mechatronic Engineering.
    ENGLISH ABSTRACT: This project investigated the feasibility of incorporating photovoltaic cells into plastic roof tiles using injection moulding. Such tiles have the potential to provide robust and distributed electricity contained within the building envelope. Current-voltage curves of amorphous silicon modules were measured under illumination using the PVPM 2540C power measuring instrument, both before and after moulding. The efficiency after moulding was reduced by 53% to 88%, with modules that were heated for longer being degraded more. Thus the duration of exposure to high temperatures affected the extent of performance reduction during moulding. This suggested that faster moulding at a lower temperature or faster cooling could solve the problem. Economic feasibility was examined by calculating the levellised cost of electricity provided by the tiles. A large-scale development in the Western Cape was simulated using a typical meteorological year of weather data and using the anisotropic diffuse irradiance model of Perez et al. (1988). Avoided costs due to replaced roofing, avoided costs due to electricity distribution infrastructure, and Clean Development Mechanism credits were accounted for. The cost of energy calculated was R11/kWh in 2010 rands, which did not compete with the price of conventional grid-based electricity at R1.8/kWh. The importance of the cost of balance-of-system components, such as the inverter, and not only of the photovoltaic modules, was highlighted for future cost reductions. Several clear guidelines for manufacturing photovoltaic roof tiles were discovered. The most important of these was that many bypass diodes make the system more robust.