Emulsion polymerization of an epoxy-acrylate emulsion stabilized with polyacrylate. II. Using the results of statistically designed experiments to deduce a possible polymerization mechanism

Date
2000
Authors
De Wet-Roos D.
Knoetze J.H.
Cooray B.
Sanderson R.D.
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Epoxy-acrylate composite emulsions such as the one in this study can be used as metal coatings, etc. Many factors can influence the final quality of the product, and it is the aim of this study to highlight some of these factors. Statistically designed experiments were performed to investigate the influence of monomer level, the polymeric dispersant level, epoxy level, and the initiator level on particle size (light scattering), particle size distribution, and fractional conversion. It was found that the monomer level significantly influenced particle size and particle size distribution. The epoxy level and the monomer level influenced fractional conversion significantly. A qualitative model based on these observations is put forward to describe the mechanism of particle formation and polymerization. This model states that the high internal viscosity of the initial dispersed epoxy phase inhibits the formation of smaller particles and accelerates the polymerization rate during the first few minutes of polymerization by inducing a gel effect that inhibits termination and chain transfers of radical species. The addition of a monomer lowers the internal viscosity of the particles and causes them to break up into droplets containing dissolved epoxy, polyacrylate, and monomer. At the same time, radical species inside the smaller droplets can now undergo termination and chain transfer reactions. To confirm this model, polyacrylates of varying molecular masses were synthesized. Variation of the molecular masses of these polyacrylates resulted in variation in the viscosity of the dispersed phase. Polymerizations conducted with the polyacrylates confirmed the model observations. A dispersed phase with a high viscosity results in an increased polymerization rate, larger overall particle size, and a higher mass average molecular mass copolymer compared to lower molecular mass polyacrylates.
Description
Keywords
Acrylics, Dispersions, Dissolution, Emulsion polymerization, Emulsions, Epoxy resins, Initiators (chemical), Monomers, Particle size analysis, Polyacrylates, Viscosity, Composite emulsions, Polymer blends
Citation
Journal of Applied Polymer Science
76
3