• A case for implementing self-organising traffic signal control on South African roads 

      Movius, Samantha Jane; Van Vuuren, Jan Harm (Southern African Institute for Industrial Engineering, 2019)
      ENGLISH ABSTRACT: Traffic signal optimisation may lead to the alleviation, to some extent, of urban traffic congestion, particularly by using real-time data rather than expected traffic flow data. Recent advances in radar ...
    • A case study on maximising the profitability of a form fill and seal machine by optimising interruption intervals 

      Vlok, P. J.; Fourie, C. J. (SAIIE, 2010)
      ENGLISH ABSTRACT: The practice of delivering consumer liquids in sachets, as opposed to alternative disposable packaging, has gained significant ground in the market in recent years because of environmental considerations, ...
    • Circular supply chains and renewable chemical feedstocks : a network configuration analysis framework 

      Srai, Jagjit Singh; Tsolakis, Naoum; Kumar, Mukesh; Bam, Wouter (Taylor and Francis, 2018)
      ENGLISH ABSTRACT: The aim of this research is to provide a comprehensive decision-making process and a framework for exploring the commercial viability of supply chains (SCs) arising from renewable chemical feedstocks ...
    • Cluster development in the SA tooling industry 

      Von Leipzig, Konrad; Dimitrov, Dimiter (SAIIE, 2015)
      This paper explores the concept of clustering in general, analysing research and experiences in different countries and regions, and summarising factors leading to success or contributing to failure of specific cluster ...
    • Comparing the sustainable development potential of industries : a role for sustainability disclosures? 

      Du Plessis, Johan; Bam, Wouter (MDPI, 2018-03)
      Governments often seek to facilitate sustainable growth through the targeted support of specific industries that are deemed to have considerable sustainable development potential. However, the selection of appropriate ...
    • Concept and development of an interactive tool for trial recruitment planning and management 

      Spies, Ruan Arnold; Siegfried, Nandi; Myers, Bronwyn; Grobbelaar, Sara S. (BMC (part of Springer Nature), 2021-03-06)
      Background: Predicting and monitoring recruitment in large, complex trials is essential to ensure appropriate resource management and budgeting. In a novel partnership between clinical trial investigators of the South African ...
    • A conceptual framework for the certification of laser powder bed fusion process quality management systems for aerospace applications 

      Gibbons, Duncan William; Van Der Merwe, Andre Francois (Southern African Institute for Industrial Engineering, 2021)
      ENGLISH ABSTRACT: This study aims to develop a conceptual framework for the certification of laser powder bed fusion quality management systems for aerospace applications. This research is structured around industry standards ...
    • A conceptual framework to increase competitiveness in a biltong factory 

      Henning, Mieke; Hagedorn-Hansen, Devon; Von Leipzig, Konrad H. (Southern African Institute for Industrial Engineering, 2018-11-09)
      ENGLISH ABSTRACT: The global annual biltong market value was estimated at roughly R640 million to R1.1 billion in 2003. By 2015, biltong sales were reported to be more than R2.5 billion. To stay competitive as a biltong ...
    • Concurrent engineering with constraint networks 

      Minnaar, Steve; Reinecke, Robert (SAIIE, 1993)
      ENGLISH ABSTRACT: Concurrent engineering is a systematic approach to the integrated, concurrent design of products and their related processes, including manufacture and support. It allows the consideration of all elements ...
    • Constraint programming and university timetabling 

      Groves, G. W.; Van Wijck, W. (SAIIE, 2002)
      ENGLISH ABSTRACT: The technology of Constraint Programming is rapidly becoming a popular alternative for solving large-scale industry problems. This paper provides an introduction to Constraint Programming and to Constraint ...
    • The contribution of energy efficiency towards the success of industrial organisations in South Africa 

      Gouws, P. A.; Brent, A. C.; Pierce, W. T. (Southern African Institute for Industrial Engineering, 2012-05)
      ENGLISH ABSTRACT: Internationally, governments and lobby groups increasingly put pressure on organisations to reduce their impact on the environment. To this end, various studies show the drivers, barriers, and contributions ...
    • Corrective action in car manufacturing 

      Rhone, H.; Page, D. C. (SAIIE, 1998)
      In this paper the important .issues involved in successfully implementing corrective action systems in quality management are discussed. The work is based on experience in implementing and operating such a system in an ...
    • Correlating the content and context of PAS 55 with the ISO 55000 series 

      Van den Honert, A. F.; Schoeman, J. S.; Vlok, P. J. (Southern African Institute for Industrial Engineering, 2013-08)
      ENGLISH ABSTRACT: The ISO 55000 series is soon to supersede PAS 55 as the most recognised international standard for asset management. A correlation of the content and context of PAS 55 with the ISO 55000 series is required ...
    • Correlation and causation : a potential pitfall for efficient asset management 

      Heyns, Johannes Hendrik; Vlok, P. J. (South African Institute for Industrial Engineering, 2014)
      ENGLISH ABSTRACT: The successful coordination of activities and practices within a system rely on the organisation’s ability to make informed decisions. Decisions must be made quickly and effectively, while ensuring ...
    • A cost optimised process mean set point for two sided specifications 

      Van Wijck, W.; Von Benecke, M. (SAIIE, 1999)
      ENGLISH ABSTRACT: This paper describesthe derivationof cost minimisingexpressions to optimallyset the processmeanof a manufacturing processrestrictedby a double-sidedspecification. Two scenariosare considered. For the first ...
    • Critical review of the levelised cost of energy metric 

      Sklar-Chik, M. D.; Brent, A. C.; De Kock, I. H. (Southern African Institute for Industrial Engineering, 2016)
      The purpose of this paper is to critically review the ‘levelised cost of energy’ metric used in electricity project development. This metric is widely used, because it is a simple metric to calculate the cost per unit of ...
    • The current and future energy economics of Concentrating Solar Power (CSP) in South Africa 

      Craig, O. O.; Brent, Alan C.; Dinter, Frank (Southern African Institute for Industrial Engineering, 2017)
      ENGLISH ABSTRACT: For South Africa, an increase in energy demand is associated with higher CO2 emissions. In order to overcome this challenge, the government started the Renewable Energy Independent Power Producer Procurement ...
    • Customer super-profiling demonstrator to enable efficient targeting in marketing campaigns 

      Walters, Marisa; Bekker, James (Southern African Institute for Industrial Engineering, 2017-11-22)
      ENGLISH ABSTRACT: Difficulties lie with identifying the right customers to engage in successful marketing campaigns. Thus far, segmentation has been a popular marketing method for selecting customer groups for targeted ...
    • Decision support for open-air irrigation reservoir control 

      Van der Walt, J. C.; Van Vuuren, J. H. (Operations Research Society of South Africa, 2018)
      ENGLISH ABSTRACT: The availability of irrigation water greatly impacts on the profitability of the agricultural sector in South Africa and is largely determined by prudent decisions related to water release strategies at ...
    • A decision support model for passenger capacity design of BRT stations 

      Engelbrecht, L.; Bekker, J. (Southern African Institute for Industrial Engineering, 2012)
      ENGLISH ABSTRACT: In this paper, a decision support model for capacity planning of bus rapid transit stations is proposed. Static, deterministic models are used at present for station capacity design, whereas bus passenger ...