ENGLISH ABSTRACT: In this thesis a new voltage control method is developed for a three-phase inverter supply system. The inverter supply system consist of a Permanent Magnet Generator, a three-phase rectifier, a three-phase ...

ENGLISH ABSTRACT: This thesis investigates the credibility of the vanadium redox flow energy storage system, sometimes termed vanadium redox battery (VRB). The focus is on the use of this technology in peak-shaving and ...

ENGLISH ABSTRACT: This thesis describes the development of a GPS Based Time Stamping and Scheduling System for power system applications. These applications include Wide Area Measurements (WAMs) of electrical power ...

ENGLISH ABSTRACT: Two distinct simulation methods have been developed to simulate the single and the multi-phase excited current waveforms of the switched reluctance machine (SRM) under single pulse mode operation. These ...

ENGLISH ABSTRACT: This thesis presents results of a study on the small-signal stability of a single-machine infinite-bus power system. Conditions of generator loading and network impedance are identified that require ...

ENGLISH ABSTRACT: This thesis discusses the analysis and design of a voltage regulator based on an AC-to-AC converter. A background study was performed on the best topology for the purpose. The chosen topology was ...

ENGLISH ABSTRACT: This thesis covers the development of a multilevel cascaded inverter for the purpose of costeffective transformerless series dip compensation. Of all known power quality problems, voltage dips are the ...

ENGLISH ABSTRACT: This thesis presents the design and implementation of a voltage controller for an Uninterruptible Power Supply (UPS) Inverter. The inverter is capable of producing a nearly sinusoidal output voltage ...

Electrical energy is continuously transported across the world by high voltage transmission lines. These transmission lines are however subject to losses beside the inherent resistive and dielectric losses. This additional ...

ENGLISH ABSTRACT: The optimal placement of different types of compensators on electrical networks is a complex task faced by network planners and operations engineers. The successful placement of these devices normally ...