Performance characteristics of an air-cooled steam condenser incorporating a hybrid (dry/wet) dephlegmator

Date
2008-12
Authors
Heyns, Johan Adam
Journal Title
Journal ISSN
Volume Title
Publisher
Stellenbosch : Stellenbosch University
Abstract
This study evaluates the performance characteristics of a power plant incorporating a steam turbine and a direct air-cooled dry/wet condenser operating at different ambient temperatures. The proposed cooling system uses existing A-frame air-cooled condenser (ACC) technology and through the introduction of a hybrid (dry/wet) dephiegmator achieves measurable enhancement in cooling performance when temperatures are high. In order to determine the thermal-flow performance characteristics of the wet section of the dephlegmator, tests are conducted on an evaporative cooler. From the experimental results, correlations for the water film heat transfer coefficient, air-water mass transfer coefficient and the air-side pressure drop over a deluged tube bundle are developed. During periods of high ambient temperatures the hybrid (dry/wet) condenser operating in a wet mode can achieve the same increased turbine performance as an oversized air-cooled condenser or an air-cooled condenser rith adiabatic cooling (spray cooling) of the inlet air at a considerably lower cost. For the same turbine power output the water consumed by an air-cooled condenser incorporating a hybrid (dry/wet) dephlegmator is at least 20% less than an air- cooled condenser with adiabatic cooling of the inlet air.
Description
Thesis (MScEng (Mechanical and Mechatronic Engineering))--Stellenbosch University, 2008.
Keywords
Dry-cooling, Dry/wet cooling systems, Adiabatic cooling, Hybrid cooling system, Dissertations -- Mechanical engineering, Theses -- Mechanical engineering
Citation